17 november 2012

Carbon Printing - a beautiful and old photographic technique from the 19th century

I followed a course in carbon printing in Middelburg, The Netherlands at Polychrome (Kees Brandenburg).
Carbon printing is an old photographic procedure, in which carbon black (lamp black) was used for making black & white prints. This technique is (probably) developed by Alphonse Poitevin in 1855. This technique was adapted in 1868 by Louis Arthur Ducos du Hauron into color printing with pigments. These techniques were commonly used well into the middle of the 20th century. 
carbon print van Mark Sink, "The Great Sand Dunes #7"
(carbon print by Mark Sink, "The Great Sand Dunes #7")
Carbon printing is - besides gum printing - one of the most durable and lasting printing techniques. The carbon prints will stand out as if they were made yesterday among all kinds of prints from the 19th century available in foto archives.
How does carbon printing work? A sheet of paper is coated with a layer of pigmented gelatin. When the paper has dried it is made sensitive to light with dichromate (applied with a brush). After the paper has dried again, it can be exposed by contact printing with a negative. The exposed paper is then put under water and it makes contact with an other sheet of paper: the final carrier of the image. Some light pressure is applied to this sandwich for some time. When removing the sandwich from the water, keep the sandwich together and wash it gently in warm water. The original sheet of paper will come lose from the pigmented layer: it is now transferred to the new sheet of paper. This sheet with the image is now washed with cold water and will harden.
This technique is still taught in The Netherlands in Middelburg by Kees Brandenburg
There is an english forum about carbon printing.
A free english handbook (100 pages) can be downloaded here: www.carbonprinting.com.

carbon print van Albert Octavus Knoblauch - Pitch and Toss  - 1909
(Pitch and Toss - carbon print by Albert Octavus Knoblauch from 1909)

14 november 2012

Pinhole body cap for Nikon & Canon

I  found a nice and well made pinhole body cap for Nikon and Canon. 
(Body cap with pinhole for Nikon)

(Body cap with pinhole for Canon)
It has a very nice metal pinhole (laser drilled, 0.2 mm) incorporated into the cap. 

I'll make some tests shortly.

4 november 2012

My first pinhole image ever (2001)

This is the very first pinhole image I have made in my backyard in 2001:
(my vert first pinhole image)

I had build me my first wooden pinhole camera and loaded it with Ilford photographic paper. Exposure time was 30 seconds. The camera is made of Afzelia wood, size 11 x 11 x 11 cm. The negative size is 10 x 10 cm. The pinhole was made out of a soda can (pinhole size 0,3 mm). I had a lot of fun building it. And I was very pleased that my first test shot (picture above) was a success. The beginning of a pinhole camera building career ;-)

(my daughter standing still for 30 seconds)
This is an image of my daughter (3 years old) trying to hold still for 30 seconds in June 2003 (paper negative). This test shot was made with an old Gevabox from 1951, I converted into a pinhole camera. Negative size 6x9 cm on 120 rollfilm Kodak Tri-X.

(the original Gevabox model from 1951)